Content (p.1)
1. Technical Specifications, Connections, and Chassis Overview (p.2)
1.1 Technical Specifications (p.2)
1.1.1 Vision (p.2)
1.1.2 Sound (p.2)
1.1.3 Miscellaneous (p.2)
1.2 Connection Overview (p.2)
1.2.1 Side I/O connections (p.2)
Figure 1-1 Side I/O connections (p.2)
S-Video (Hosiden): Video Y/C - In (p.2)
Cinch: Video CVBS - In, Audio - In (p.2)
Mini Jack: Audio Head phone - Out (p.2)
1.2.2 Rear Connections (p.2)
Figure 1-2 Rear I/O (p.2)
Aerial - In (p.2)
Mini Jack: Audio - In (p.2)
PCMCIA (p.3)
Data (p.3)
SPDIF (p.3)
Service Connector (ComPair) (p.3)
Service Connector (UART) (p.3)
DVI-I: Digital/Analogue Video - In (p.3)
Figure 1-3 DVI-I connector (p.3)
EXT1: Video RGB - In, CVBS - In/Out, Audio - In/Out (p.3)
Figure 1-4 SCART connector (p.3)
EXT2: Video Y/C - in, CVBS - In/Out, Audio - In/Out (p.4)
Figure 1-5 SCART connector (p.4)
1.3 Chassis Overview (p.4)
Figure 1-6 PWB locations (p.4)
2. Safety Instructions, Warnings, and Notes (p.5)
2.1 Safety Instructions (p.5)
2.2 Warnings (p.5)
2.3 Notes (p.5)
2.3.1 General (p.5)
2.3.2 Schematic Notes (p.5)
2.3.3 Rework on BGA (Ball Grid Array) ICs (p.5)
General (p.5)
Device Removal (p.5)
Area Preparation (p.5)
Device Replacement (p.6)
More Information (p.6)
2.3.4 Lead-free Solder (p.6)
Figure 2-1 Serial number example (p.6)
Figure 2-2 Lead-free logo (p.6)
2.3.5 Alternative BOM identification (p.6)
2.3.6 Practical Service Precautions (p.6)
3. Directions for Use (p.7)
4. Mechanical Instructions (p.8)
4.1 Cable Dressing (p.8)
Figure 4-1 Cable dressing (p.8)
4.2 Service Positions (p.8)
4.2.1 Foam Bars (p.8)
Figure 4-2 Foam bars (p.8)
4.2.2 Aluminium Stands (p.8)
Figure 4-3 Aluminium stands (drawing of MkI) (p.8)
4.3 Assy/Panel Removal (p.9)
4.3.1 Rear Cover (p.9)
Figure 4-4 Rear cover (p.9)
4.3.2 Cover Shield for IBO-zapper & SSB (p.9)
Figure 4-5 Cover shield (p.9)